Your device ran into a problem: If you get the “Your PC ran into a problem and needs to restart” error message, you could be wondering what to do next. Most of the time, this mistake comes after a Blue Screen of Death (BSOD) and a computer crash or restart. The reboot is mostly a safety step that stops the system from getting worse. The error could be caused by anything from a bug in the program to a problem with the hardware, so troubleshooting is an important step.
Starting Windows in Safe Mode is the first thing that can be done to fix “your device ran into a problem”. Only the most important drivers and services are loaded in this minimal context. You can be sure that the problem is with the software if the PC works fine in Safe Mode. One can dig deeper by running system checks and going back to good settings from before. In the next level, disk checks and memory tests may be used to find and fix problems with the hardware or file system.
Page Contents
“Your PC Ran Into a Problem and Needs to Restart” error: how to fix it
People sometimes get a Blue Screen of Death (BSOD) error that says, “Your PC Ran into a Problem and Needs to Restart.” This can be very annoying. How to deal with it:
What Could Have Caused the “Your PC Ran into a Problem and Needs to Restart” Message?
- Drivers that are too old: Drivers let your hardware talk to your operating system, so drivers that are too old can cause issues.
- Faulty Memory (RAM): If there are mistakes in your computer’s memory, it may crash.
- Too much heat: If your computer gets too hot, it may turn off to protect itself.
- System files that are damaged: Over time, important system files can get damaged.
- New Hardware or Software: Hardware or software that was just added could cause problems.
- Malware: Viruses and other malware can make a system unstable.
How to Fix the Issue:
A few things you can do to fix the problem of your “device ran into a problem” are
| Step | Description |
|---|---|
| 1. Restart Your Computer | Sometimes, a restart can clear up temporary errors causing the BSOD. |
| 2. Update Drivers | Outdated drivers are a common issue. Update your drivers manually or use a driver updater tool. |
| 3. Check for Malware | Run a thorough scan with your antivirus software. |
| 4. Run a Memory Check | Use the Windows Memory Diagnostic Tool to test your RAM. |
| 5. Run System File Checker (SFC) | SFC scans for corrupted system files and attempts to repair them. Run it from an elevated command prompt: Type ‘sfc /scannow’ and press Enter. |
| 6. Check for Updates | Keep your Windows operating system up-to-date. |
| 7. Undo Recent Changes | If the problem began after a recent update or installation, try uninstalling the program or reverting using System Restore. |
| 8. Reset Windows | As a last resort, reinstall your operating system. This will delete your files, so ensure you have a backup. |
Take Note:
- Note Error Codes: If the BSOD shows you an error code, look it up online to find exact ways to fix it.
- Seek Professional Help: If you’re not comfortable or the problem keeps happening, talk to a technician.
Troubleshooting Steps
If you get the error message “Your PC ran into a problem and needs to restart,” following an organized plan can help. This part gives you steps to analyze and fix the problems that are causing the error.
Access Safe Mode and Check for Updates
Safe Mode starts Windows with a minimal set of drivers and services. This mode can help solve problems. To access Safe Mode:
- Restart your PC and hold down the Shift key while selecting Power > Restart.
- When you get to the Choose a choice screen, click Restart and then go to Troubleshoot > Advanced options > Startup Settings.
- Press the number key that says “Enable Safe Mode with Networking” after the computer restarts.
In Safe Mode, check for Windows updates:
- Go to Settings (use the keyboard shortcut Windows + I).
- Select Update & Security.
- Click on Windows Update and choose Check for updates.
Perform System and Disk Scanning
Scanning your system for errors is important. For system file errors, the System File Checker (SFC) is useful, while the Check Disk Utility (CHKDSK) can find and fix disk-related errors.
To run SFC:
- Log in as an administrator to the Command Prompt.
- To scan, type sfc /scannow and press Enter.
To run CHKDSK:
- Log in as an administrator to the Command Prompt.
- To fix any mistakes that it finds, type chkdsk /f and press Enter.
Disk Image Servicing and Management (DISM) should be used if SFC doesn’t work. Type DISM /Online /Cleanup-Image /RestoreHealth into the Command Prompt as a user.
How to Use the Recovery Options in Windows
Windows Recovery gives you tools to fix common problems. Start-up Repair and System Restore are two useful tools.
To make Startup Repair work, do the following:
- As you did for Safe Mode, go to the “Advanced” menu.
- Just click on Startup Repair and do what it says.
To restore the system:
- Choose System Restore from the list of advanced choices.
- Pick a point in time before you saw the error and follow the steps to get back to that place.
Don’t forget that you can also use a system image recovery if you have already made an image copy.
More advanced fixes and troubleshooting
To fix the “Your PC ran into a problem and needs to restart” mistake, you might need to do more complex troubleshooting. This part tells you exactly what to do to check the hardware, fix problems, and change the system settings.
Inspect and Manage Hardware Issues
A lot of the time, system crashes are caused by hardware issues. Make sure that the RAM and hard drive on your computer are working properly. If you have problems with your RAM, you may need to reseat or replace the memory sticks. If your hard drive is giving you trouble, use a disk check tool to find and fix any mistakes. Watch out for signs of burning, which can also cause something to crash. If you want to make sure your computer works, check to see if the fans are clear of dust.
Fix problems with software and drivers
Instability can often be caused by driver arguments. Use the Device Manager to find and fix broken drivers. Drivers that were updated not long ago and were updated around the time your problems started may need to be rolled back. If you want to do this, open Device Manager, find the device, click “Properties,” and look for “Roll Back Driver.” You can also use the Programs and Features area of the Control Panel to get rid of updates or apps that are giving you trouble.
Change the system’s settings and configuration
Problems at their roots can be fixed by fine-tuning advanced system settings. You can change speed settings by going to system properties. You can change settings for best speed in the “Advanced” tab, which may help the system work better. If the problems don’t go away, you could try a system restore to get your machine back to the way it was before the errors started. To get to System Restore, go to the Control Panel, look for “Recovery,” and click “Open System Restore.”
Frequently Asked Questions
Common fixes for the “Your PC ran into a problem and needs to restart” error include disk checks, system updates, and repairs. Solutions specific to the various sources of the issue are provided in this section.
What steps can I take to resolve the ‘Your PC ran into a problem and needs to restart’ error?
To see if the issue of “your device ran into a problem” persists, one should start by restarting their computer in Safe Mode. Afterwards, Windows system files may be repaired by using the DISM tool and System File Checker. It’s also essential to perform routine maintenance, such as upgrading drivers and checking for malware.
How can I resolve problems that result in the “Your PC ran into a problem” error screen using Startup Repair?
A useful tool when dealing with this error is Startup Repair. This tool, which may be found in the Windows recovery environment, aims to resolve common problems that hinder Windows from starting up properly.
What are the typical causes of a computer stating that it encountered an issue and had to restart while playing a game?
Common causes of “your device ran into a problem” include overheating, out-of-date or defective drivers, and issues with Windows system files or game files. Occasionally, a lack of system resources or hardware conflicts may also be the cause of these problems.
How can I solve a Windows 10 constant restart loop problem?
Through system settings, one might turn off automatic restart in the event of a system failure to end the restart loop. If it doesn’t work, you might need to reboot Windows or boot into Safe Mode and execute a system restore.
If my computer is stuck on a blue screen that says, “Your PC ran into a problem and needs to restart,” what should I do?
It can be useful to take note of any error codes displayed when a blue screen appears. These codes can then be used to determine the problem. It can also be helpful to verify hardware connections or run the built-in Windows troubleshooter.
When I get the message “Your PC ran into a problem and needs to restart,” how can I fix the failure to boot?
Reverting to the last known good configuration or using Startup Repair from the Advanced Boot Options menu may fix a boot problem. Resetting the BIOS settings to default or using CHKDSK to check for disk issues may also be helpful.
Discover more from In-Stat.com: Computers and Consumer Tech, Gaming and Online Services
Subscribe to get the latest posts sent to your email.
